A quick update.  5 days ago we were almost caught up with transfers, emails, and phone calls.  We also have completed approximately 12 builds including testing for customers in the last two weeks and have at least that many in process.

Currently we are now running about 7 – 10 days behind for transfers, phone responses are about 5 – 7 days, and emails right at 5 days.  The best way to communicate is by email and provide a subject line.  We are not selling AR parts so don’t contact us on that.  Additionally, all other guns are out of stock or allocated and will do us little good to try and order one.

As of now we have secured a continuous allocation for 308 & 556 matched receiver sets for the next 6 months, approximately 60 22cal (556/223) blanks, and 25 30cal blanks.  Our pinch points are:

1. Reasonable priced triggers.  We’re now using all premium grade triggers.
2. Bolt carrier groups.  We’re paying a higher premium but we’re using nickel boron coated carriers when we can.
3. Miscellaneous parts:  Grips, pins, springs, gas blocks, tubes, etc we have a few streams constantly trickling in.
4. Magazines:  We’re going to have to go to 1 per order temporarily.  We are getting a few in here and there.
5. Ammunition:  We are well supplied for 308 match, but will be searching for projectiles and brass.  In 556 we are short projectiles but have a line on some Hornaday projectiles.

At this time we are not yet taking new orders so that we can complete our current builds for clients who have patiently waited while we took as many orders as we possibly could digest.  In a few weeks we will be releasing a custom build project for the 556 rifles that we will start taking orders for.

Additionally, we will start taking orders for 308 as well in about a month.  However, we will be short BCG’s but we have at least 40 on order from various sources.  One important issue to note is, over the last 5 years we’ve tested multiple configurations:

1. DPMS barrel extension with the barrel mounted in an Armalite receiver.
2. Armalite barrel extension with the barrel mounted in a DPMS receiver.
3. Armalite BCG in a DPMS receiver.
4. DPMS BCG in an Armalite receiver.
5. All 4 combinations reversed.

During these tests we have discovered you can interchange these components without failure, pressure, or operational issues and therefore will be using components from CMMG, Armalite, DPMS, JP Rifles to build 308 rifles.

A quick update.  5 days ago we were almost caught up with transfers, emails, and phone calls.  We also have completed approximately 12 builds including testing for customers in the last two weeks and have at least that many in process.

Currently we are now running about 7 – 10 days behind for transfers, phone responses are about 5 – 7 days, and emails right at 5 days.  The best way to communicate is by email and provide a subject line.  We are not selling AR parts so don’t contact us on that.  Additionally, all other guns are out of stock or allocated and will do us little good to try and order one.

As of now we have secured a continuous allocation for 308 & 556 matched receiver sets for the next 6 months, approximately 60 22cal (556/223) blanks, and 25 30cal blanks.  Our pinch points are:

1. Reasonable priced triggers.  We’re now using all premium grade triggers.
2. Bolt carrier groups.  We’re paying a higher premium but we’re using nickel boron coated carriers when we can.
3. Miscellaneous parts:  Grips, pins, springs, gas blocks, tubes, etc we have a few streams constantly trickling in.
4. Magazines:  We’re going to have to go to 1 per order temporarily.  We are getting a few in here and there.
5. Ammunition:  We are well supplied for 308 match, but will be searching for projectiles and brass.  In 556 we are short projectiles but have a line on some Hornaday projectiles.

At this time we are not yet taking new orders so that we can complete our current builds for clients who have patiently waited while we took as many orders as we possibly could digest.  In a few weeks we will be releasing a custom build project for the 556 rifles that we will start taking orders for.

Additionally, we will start taking orders for 308 as well in about a month.  However, we will be short BCG’s but we have at least 40 on order from various sources.  One important issue to note is, over the last 5 years we’ve tested multiple configurations:

1. DPMS barrel extension with the barrel mounted in an Armalite receiver.
2. Armalite barrel extension with the barrel mounted in a DPMS receiver.
3. Armalite BCG in a DPMS receiver.
4. DPMS BCG in an Armalite receiver.
5. All 4 combinations reversed.

During these tests we have discovered you can interchange these components without failure, pressure, or operational issues and therefore will be using components from CMMG, Armalite, DPMS, JP Rifles to build 308 rifles.

Friends we hope everyone had a blessed Christmas and that everyone received at least one AR and 1000 rounds of ammunition.  Nothing shows you care more than giving your loved one, wife, husband, son or daughter a new firearm and a case of ammo to start the year off right.  Yep, you know us not to be the politically correct guy on the block and in wake of the last few weeks how insensitive this may sound but as a result of our recent sensitivity class sponsored by a good friend and local client Akmed we’ve learned to deal with our insensitivity.

You may ask, who is Akmed, how can we get this training, what did he teach?  Since it was a free class and we don’t want to overwhelm him, he taught us new phrases in dealing with winers: STFU.  He also enlightened us on why liberal men like to hang out near urinals:  Envy.  Also, how to deal with a leftist crazed feminist:  Expose your manliness, this gets them every time.  (If you’re a real man’s woman, he said it was more then acceptable to slap the bitch.)

Seriously friends, this kind of training is in-valuable and we are always trying to stay on the cutting edge of offensive techniques to keep the liberals in perpetual derangement.  Overall we can recommend this highly effective training seminar.

Now onto more business issues, in the last 10 days we have effectively committed the majority of our AR/LR inventory.  Although we will have a few holes to fill in on a few orders we will be working our way through our email list of AR requests over the next several weeks.

We’re asking that our existing and new clients email us and provide in the subject line the type of item you are looking for.  For example:  LR-308 Custom, AR-15 Custom, Suppressor & Caliber, Pistol & Model & Caliber, etc.  This will allow us to quickly review for items we know that we have or can procure.

In the body of the email provide us as much information about the item you are looking for.  For factory standard firearms (pistols, shotguns, rifles) provide us the manufacturer, model, caliber and any secondary considerations.  This will allow us to minimize the email thread and when we respond have more information for you.  Also provide a phone number so that we can call you.

For custom AR/LR rifles provided us with the following:

Caliber and barrel contour

Stock type (collapsible or fixed)

Trigger type (single or two stage)  We have Giessele, Wilson Combat, Timney, POF

Forearm (Troy or Midwest have been available)

We will be closing down from this Saturday through the 1^st to perform our year end inventory and reconcile our books and forms.  Once we have a handle on the available parts and combine it with what we know was committed and confirmed by several of our suppliers we will start the process of going through our email list.

Our goal will be to provide you with an up to date list of components and see how it fits with your requested build.  If you choose to hold out for exactly everything you want you will remain in place on the list and we will allocate parts as they come available.

Additionally, on some of these components we cannot commit to an exact amount because we don’t know where we will have to source it from.  Currently pricing on our 308 bolt carriers will vary from $230 - $400 depending on whose components we use.  (JP, BRO, R, DPMS, SI).  We will give you option to take what’s available or hold out for something different.

We expect that during the month of January we will be committed to building rifles for orders we’ve taken in the last 5 days.  By February we expect to see some new inventory trickling in and allow us to start filling the new order request.

We have also depleted a good portion of our suppressor inventory but as of now we have new orders in and will be expecting serial numbers for the following:

TBAC 30P1 – January and following through April

TBAC 30BAC – early January and following through April

AAC 7.62SDN – 2 on order and we don’t expect to order any more due to the inconsistency in supply.

AAC TiRant 45 – 2 on order and we will be replacing this with the SWR Octane 45.

YHM 7.62 TI & SS – January – April.  We’ll be carrying more of these.

YHM 5.56 TI – January – April.

Silencerco (Sparrow, Osprey 45, Saker) – Monthly orders

SWR (Octane 9, Octane 45, Spec War 5.56, Spectre II,) – Monthly orders

We’re also looking to expand our suppressor selection next year to offer more pistol caliber selections and quick detach 5.56.

For the next two months we do ask your patience (this was not taught in our sensitivity seminar) when contacting us and waiting for a response.  Again we ask that for new orders that you email us so we track everything in an orderly fashion and allow us to keep our voice message open for appointment scheduling or immediate questions on an existing project.

As a reminder we do work at a real job during the day and generally return calls on our way to work, lunch, and way home.  Also, when we are with clients performing transfers or discussing their firearms purchase we typically don’t answer so we can provide the person the attention they expect.

If you’re calling to confirm an appointment for that day or time frame, text us so we can let you know to come by or the status without disrupting our current customer.  Please don’t use the text feature for general questions that can be answered in an email.  Again we’re trying to control the level of activity so each person we deal with doesn’t get treated like some used crack whore looking for a dime bag.

We appreciate your business and look forward to working with you next year.

D9 & Associates

As everyone knows we along with every other gun dealer in the world is working overtime to produce and deliver as much ammunition and firearms as possible in the next several weeks.  As always with liberals, liberalism, democrats, leftist and fellow travelers it’s the un-intended consequences of their actions that exacerbates a perceived problem.

As Saul Alinsky, Cloward & Pivens, Mao, Stalin, Hitler, and other like-minded modern day democrats the stated goal is not their intent.  They state we have to confiscate or ban guns to protect our children (as if my children belong to them), they either create, manufacture, or use a crisis to further their goal.  For instance gun laws the way we view it aren’t in place to protect me or my family from criminals but more likely to protect the ruling class from the masses of people who have worked to create goods, services, and the American way of life.  (Something they themselves are unable to do.  Eliminate morality and stealing is than justified.)

We state this simply because of the cataclysmic economic and freedom limiting events before us unfold.  Ask yourself, what was the price of gold 4 years ago as related to the stock market valve and what is it today?  You may find the actual value of your portfolio as related to tangible hard assets is at best equal or less than it was 4 years ago.  How would you feel if you wake up one morning & the dollar is found to be worth 4 cents (similar to Greece, Spain, or any number of Euro trash socialist countries)?

You’re first question would be who did this to me?  Who stole 40 years of my life’s work and savings?  Who is responsible for managing the currency, protecting our country, our trade?  Although this didn’t happen overnight, when it hits it will feel like it happened overnight, and who will you blame?

So back to the start of this news brief ask yourself again, how many more guns & ammunition are now in the hands of at least 60 million Americans?  (We also suspect some of you who voted for your dictator in chief maybe questioning your motives for voting that way.  To fucking bad if you need a gun now asshole because we won’t sell it to you.)  We can only guess how many more guns have been sold this week alone compared to the normal ebb and flow of business and had they kept their clap traps shut.

As of this time we’ve secured small pockets of receivers to continue building our custom rifles and deliver the quality as we have in the past.  However, you will detect some inflation in the pricing due to the following reasons:

1. We’ve operated outside of our normal sources for receivers, bolt carriers, and other associated hardware.
2. With the cost between standard forged receivers and billet, we’ve opted to include more billet sets in our inventory.  In this case you will get a more cosmetically appealing rifle with tighter tolerances.
3. With bolt groups we’ve procured nickel boron coated groups and designer 308 bolt carriers.  These are inherently a premium grade product not required for good operation but offer better operation for suppressed weapons.
4. With triggers we will have limited access to Rock River, Giessele and other manufacturers which will require a higher grade trigger then you would normally run.  Again, you are getting something for your money but it may not be the style we would normally have chosen for your build.

As part of this, we will not be selling individual components, but for example if we can build most of your rifle (maybe less a BCG, or trigger temporarily) we will log it out so you own it.  Then in a month or so when inventory comes available we will complete your rifle.

At this time with the high volume of inventory turnover and replacement cost we will be requesting 100% payment at time of purchase.  We are a reputable dealer and as everyone knows we honor our commitments as we do when we stand behind every rifle we build.

For the best and most efficient service please email us and provide a subject line so we can quickly identify what it is you’re looking for and if we’ll be able to provide it.  We are working the emails and phone calls in order and it may take us up to 5 days to respond.  At this time we are unable to take in coming calls because of the backlog of voice mails currently in the stack.  Similarly we’re about 5 days behind on transfers and we have been experiencing ATF delays.

Again we appreciate your business and be patient we will respond (unless you’re one of the aforementioned pricks).

My friends as most of you already know that after the election gun sales went up exponentially.  We have been swamped with trying to maintain email and phone traffic and trying to respond as best as possible.  Combined with this we’re also processing several builds.  In addition to this we’re exceptionally busy with our real job trying to keep the lights on for millions of Americans.  (Both events are a direct result of 51% of dimwitted low information democrat voters who believe they are entitled to my time and money.)

As a result I’m sure we’ve had some emails & phone calls slip through the cracks or simply we’ve dropped the ball.  Generally, we try and make good on everything we do but we’ve recently been informed by a potential new client that our communications and responses to his request to trade one of his firearms for some of our products was less then impressive.

So we decided to post the email thread and help this individual spread the word on what rotten SOB’s we are here at D9Firearms.  After this we’ve realized how insensitive we are and will be taking training classes for diversity, sexual harassment, sensitivity, gay awareness, and potentially other classes to make us a more caring and responsive company.

So if you’ve been treated like a used crack whore, we’ll it could be because we’ve detected some similarities or we’re just so freaking busy we’re doing what we can to meet your firearms needs.  As always give us a call or email us and we appreciate your patience.

Email thread:

From: Scott
Sent: Saturday, December 15, 2012 9:31 AM
To: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Subject: RE: D9firearms trades

Darrel,
Thank you for your time, although I must say I am disappointed. This is the second time I have attempted to do business with you and your company and must say I have not been impressed either time. I can somewhat understand your lack of interest, but find your lack of communication, ie. I had to repeatedly email you to inquire as to if you were I interested, and you made zero effort to even try to negotiate any sort of deal. I apologize that I took your precious time and I will refrain from doing so in the future, and i will do my best to share my expierences and I will be sure to advise them not to bother you as well.
Thank you.

On Dec 14, 2012 1:40 PM, < This e-mail address is being protected from spambots. You need JavaScript enabled to view it > wrote:

Scott -

I'll have to pass for now. Thanks for checking.

Darrel

Nienhueser & Associates, Inc.
www.D9Firearms.com
p.913-449-0274
f.913-499-0105
Darrel Nienhueser (D9)

-------- Original Message --------
Subject: RE: D9firearms trades
From: Scott
Date: Fri, December 14, 2012 12:12 pm
To: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Do you have any interest in these?

On Dec 12, 2012 3:51 PM, "Scott"  wrote:

I have found two compatible rifles selling online. One bare rifle for $895 and one scoped for $1200. This being retail basically and I understand this. I would say somewhere in the $800-900 range.
The 1911 was built for my dad as a bullseye competition gun. It is fitted very tightly with a true match barrel. He told me once that the gunsmith that built it included a target shot from a ransom rest of 3/4" @ 50 yards. It is sprung lightly currently as it was built for 185grn semi wadcutter target loads. It is all quality components and could easily be slightly changed to be quite a quality combat piece.

On Dec 12, 2012 3:28 PM, < This e-mail address is being protected from spambots. You need JavaScript enabled to view it > wrote:

Scott -

I looked at them but haven't had a chance to do anything else. How much are you looking for on the Remington 700 & scope?

Darrel

Nienhueser & Associates, Inc.
www.D9Firearms.com
p.913-449-0274
f.913-499-0105
Darrel Nienhueser (D9)

-------- Original Message --------
Subject: RE: D9firearms trades

Date: Wed, December 12, 2012 1:18 pm
To: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Darrel,
I never heard back from you after I sent the pics you requested. Did you not have time to reply or do you not have any interest in trading for these ?
Thanks
Scott

On Dec 11, 2012 11:58 AM, "Scott" wrote:

Would be a savage mark II fv-sr. Was drawing a black there. Lol

On Dec 11, 2012 11:26 AM, < This e-mail address is being protected from spambots. You need JavaScript enabled to view it > wrote:

Scott -

Send photo's and let's see what we can work out.

Thanks

Darrel

Nienhueser & Associates, Inc.
www.D9Firearms.com
p.913-449-0274
f.913-499-0105
Darrel Nienhueser (D9)

-------- Original Message --------
Subject: D9firearms trades
From:
Date: Tue, December 11, 2012 10:07 am
To: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Although they’re not advertising agencies the individuals that participate in these events are avid shooters, hunters, and sportsman alike.  To us it’s an excellent way to reach a defined market as well as participate in two events that bring likeminded people together as well as support two organizations that continuously, efficiently, and generously make a difference in young men and women’s lives.

In the case of the Boy Scouts of America, mothers and fathers alike are teaching their children and other children (this is the part leftist don’t understand) leadership, responsibility, self-reliance, duty to God Country and Corps, humility, and an endless set of skills that mold these boys into our doctors, engineers, Marines, generals, CEO’s and other talented men of tomorrow.  Through this one event they raise over $50,000 that supports shooting activities, education, range improvements, and NRA instruction.

For our Wounded Warriors, I don’t think an explanation is required, however I recognize that some idiot dolt leftist may stumble on this website and figure out what these men and women have bought and paid for to give them the right to say and do the ignorant garbage leftists do, so I will elaborate:

My friends, these are the people that were not forced to march into battle but choose it as a call of duty, something a very few percentage of the American people have done (not bagging on them, at least not the patriotic ones, again if you’re a leftist you can bet your ass I’m bagging on you dirt bag).  When one of these men or women (although I don’t think women should be on the front line, but I’ve met some pretty freakin bad-ass women Marines who could kick the crap out of any conscripted Nazi, NVA, or islamo fascist terrorist) leaves a part of themselves on the battle field the WW team kicks into action.

The WW team provides and never-ending line of support to help these men and women recover, assimilate back into life with their injuries, provide support for their family, and a network of other men and women for the mental support it takes every day to work things out.   The WW team is instrumental in many facets of the recovery that no-one man or woman is cable of doing on their own, which is why your generosity and support for this organization truly does change and impact the lives of each and every one they help.

In all of this we would like to offer a special thanks to the following:

• Bass Pro Shop (Olathe, KS) for allowing the Heartland Wounded Warrior team to setup and display one of our custom D9 Rifles in front of their facility.  (As a small company we couldn’t buy advertising this powerful.)
• Heartland Warriors – Organized the Fishing Tournament and D9Firearms Rifle auction.
• Boy Scouts of America Shooting Extravaganza – Hosted the sporting clay event, proudly displayed our CZ 452 suppressed rifle for one of the shooting station competitions.
• CZ-USA – Instrumental in organizing the BSA Shooting Extravaganza and gave us 2 complementary 10 round mags for allowing the use of our bad-ass CZ 452 laser like suppressed 22lr.

So my friends although you may not have won the raffle or auction items at the events, your generosity provided much more and we know that everyone on the receiving end greatly appreciated each and every contribution.  We also appreciate everyone’s participation and your continued patronage of D9Firearms.com Mfr.

D9 & Family

We just modernized our phone system with new I-phones across the board for D9, Mrs. D9, Chicken Nuggets, and AK-47.  Unfortunately we made this transition at lunch time and haven’t had a chance to update our phone message.  We expect to have that done by the end of the day.

Additionally, we receive text messages from several of you and we don’t have your phone number in our system so without a name we have no idea who is texting us.  If you would, please add your initials or first name at the end of the first text so we can respond appropriately.  (It wouldn’t be good if someone got an adult text intended for Mrs. D9 and your wife happened to see this message.)

Also, we’ve upgraded our home machines to Mac’s and we’re almost complete with that conversion and so we’re porting over email addresses and names.  Again we’re trying to capture everyone’s information but I know there will be several that we miss and at your convenience send us a test email so we can capture your information.

Thanks